Restore Last Tare Value - KERN FES 17K-4 Operating Instructions Manual

18.10 Restore last tare value

The scale provides the option to restore the last tare value used before the scale was
switched off when it is switched on again. If this function is activated, users do not
need to tare again in the event of a power failure, for example, if the same tare
weight is used.
This function is only available for the FES weighing system.
•
This function is not suitable for permanently storing PRE-TARE
values. Use the PRE-TARE function if you want to use a
permanent PRE-TARE value (see chapter 15)
•
If adjustment with internal weight has been activated at switch-on
(see chapter 18.7), the weighing plate must be unloaded before
switching on.
•
If the weighing plate is permanently loaded over a longer period
of time, this can lead to incorrect weighing results.
71
 Open <64 SCALE MANAGE> (see chapter 18.1).
 Navigate to <64C DIRECT ST> with the [F1] and
[F2] keys.
 Press [F4] key to make settings
 Select the desired setting with [F1] and [F2].
OFF Disabled
ON Enabled
 Press [F4] key to confirm selection.
 Open <64 SCALE MANAGE> (see chapter 18.1).
 Use the [F1] and [F2] keys to navigate to <64D
STORE TARE>.
 Press [F4] key to make settings
 Select the desired setting on keys [F1] and [F2].
OFF Disabled
ON Enabled
 Press [F4] key to confirm selection.
TFES_TFEJ-BA-e-2210