Levelling; Mains Connection - KERN FES 17K-4 Operating Instructions Manual

7.4 Levelling

1. Turn the foot screws in the direction of the arrows (see illustration below) to
remove the transport locking device
2. Level balance with foot screws until the air bubble of the water balance is in
the prescribed circle. Then lock the foot screws with the nuts.
 Check levelling regularly

7.5 Mains connection

Select a country-specific power plug and insert it in the mains adapter.
Check, whether the voltage acceptance on the scales is set correctly.
Do not connect the scales to the power mains unless the information on
the scales (sticker) matches the local mains voltage.
Only use KERN original mains adapter. Using other makes requires
consent by KERN.
Important:
➢
➢
➢
TFES_TFEJ-BA-e-2210
Before starting your weighing balance, check the mains cable for
damage.
Ensure that the power unit and the mains connection do not come
into contact with liquids. Cover the mains connection with the
protective cap provided when the balance is disconnected from the
mains electricity.
Ensure access to mains plug at all times.
18