Table of Contents
Advertisement
7.3 Placing
The correct location is a crucial factor in the accuracy of the weighing
results of high-resolution precision balances (see chapter 7.1).
7.3.1 Mounting the weighing platform with terminal
1. Remove the weighing plate from the scale
2. Loosen knobs on wall mounting bracket and remove mounting plates
3. Hook wall mounting bracket onto cable compartment from above
4. Hook the fastening plates in front of the cable compartment and tighten
them on the wall mounting bracket with the knobs
Make sure that the recesses of the fastening plates are aligned.
Recess
5. Leave 15 cm of the cable on the terminal. Fold the remaining cable and
place it in the cable compartment.
15
Turning knobs
Recess
Fixing plates
TFES_TFEJ-BA-e-2210
Advertisement
Table of Contents
