Table of Contents
Advertisement
16.3 Stabilisation waiting time
You can set the scale to display the weight value even if the weight value is not yet
stable after zeroing or taring.
• This function is only available for the FES weighing system.
• The FEJ weighing system always waits for a stable value.
16.4 Bar graph display
The scale's bar graph display shows how much the weighing plate is loaded with
respect to its weighing range. The bar graph display is used to show the progress of
the process during internal adjustment.
TFES_TFEJ-BA-e-2210
GLPF
Output GLP footer
RESP
Set reaction speed
B/G
Display gross weight value
DATE
Display date
TIME
Display time
TARE
Display tare value
HIGH
Display upper tolerance limit
LOW
Display lower tolerance limit
ID
Display balance identification number
Set weighing unit "Gramm"
g
Set weighing unit "Kilogramm"
kg
Set weighing unit "Carat"
ct
Press [F4] key to confirm selection.
Use the function keys [F1] to [F4] to navigate to <17
WT STABLE>.
Press [F4] key to make settings
Select the desired setting with [F1] and [F2].
OFF
Disabled
ON
Enabled
Press [F4] key to confirm selection.
56
Advertisement
Table of Contents
