Table of Contents
Advertisement
21.7.2 Adjust communication settings
All settings are made in <41 RS232C> (see chapter 21.7.1).
Set the format:
The CSP data output formats are only available for the FES weighing
system.
Set output condition:
Settings 1, 3 and 6 are not available for the FEJ weighing system.
TFES_TFEJ-BA-e-2210
Navigate to <412 FORMAT> using the [F1] and [F2]
keys.
Press [F4] key to make settings
Use [F1] and [F2] to select the desired setting:
6
6-digit numeric format
7
7-digit numeric format
8
8-digit numeric format
CSP6
CSP format with 6 digits
CSP7
CSP format with 7 digits
CBM
CBM-format
Press [F4] key to confirm selection.
Navigate to <413 CONDITION> using the [F1] and
[F2] keys.
Press [F4] key to make settings
Use [F1] and [F2] to select the desired setting:
OFF
End output
1
Permanent output
Continuous output only for stable values (interruption of
2
output for unstable values).
3
One-time output when [PRINT] key is pressed
Automatic output (One-time output when the value is
stable. The next output for another sample occurs when
4
the reading is stabilized to less than or equal to zero by
unloading, zero adjustment or tare subtraction).
92
Advertisement
Table of Contents
