Assigning The Function Keys - KERN FES 17K-4 Operating Instructions Manual

16.2 Assigning the function keys

Up to six functions can be assigned to the function keys. Three functions are
displayed per display page.
• Assignment of functions to keys [F1] to [F3] is only possible for the
weighing application of simple weighing
• The <ICAL>, <GLPH>, <GLPF> functions are available only for the
FEJ weighing system.
• The <READ> function is not supported by the FES 62K-4D and FEJ
62K-4DM weighing systems.
• The <CAL> and <HOLD> functions are only available on the FES
weighing system.
• The functions are shown on several display pages (see chapter 9.7)
55
 Use the [F1] and [F2] keys to navigate to <6
ADMIN/ADJUST>.
 Press [F4] key to access the settings
 Use [F1] and [F2] keys to navigate to <62 FREE
KEY>.
 Press [F4] key to access the settings
 Use [F1] and [F2] keys to select desired function
key
621 F1 KEY Function 1: [F1] key (display page 1)
622 F2 KEY Function 2: [F2] key (display page 1)
623 F3 KEY Function 3: [F3] key (display page 1)
624 F4 KEY Function 4: [F1] key (display page 2)
625 F5 KEY Function 5: [F2] key (display page 2)
626 F6 KEY Function 6: [F3] key (display page 2)
 Press [F4] key to change assigned function
 Function is located at the bottom right of the display
and starts flashing
 Use [F1] and [F2] keys to select desired function
NONE No function
ICAL Adjustment with internal weight
CAL Adjustment with external weight
ADD Totalization
TOTL Display total sum
HOLD Stop / freeze measurement display
GLPH Output GLP header
TFES_TFEJ-BA-e-2210