11.2 Other functions
Various functions are shown on the display in the piece counting mode, which can be
called up and switched through by pressing the keys [F1] to [F4]:
In the following table you will find short descriptions of these functions.
Function
Description
NEXT
Turn page / display additional functions
•
Change reference weight: Press the
[F3] key
REF
•
Do not change reference weight: Press
the [F4] key
TFES_TFEJ-BA-e-2210
Actual value setting method:
Press [F3] key to select <onW>.
Place the reference weight on the weighing plate
Press [F4] key to store reference weight
Numerical input of reference weight:
Press [F4] key to select <NUM>.
Enter value (Numeric entry: see chapter 9.8)
Press [F4] key to store reference weight
Place material to be weighed onto weighing plate
Percentage based on the reference weight is
displayed
Note
38