Setting Time And Date - KERN ALJ Operating Manual

Symbol
Disabled
2 minutes
5 minutes
15 minutes
 Confirm the selection, pressing the PRINT button. The scale will be switched to
the menu again.
 Return to the weighing mode, pressing the ON/OFF button.

11.10 Setting time and date

 In the weighing mode press and hold the MENU button until the sound signal stops.
The configuration menu is displayed.
 Using the navigation buttons , select the menu item <Time and date>.
 Confirm by pressing the PRINT button, the current setting will be displayed.
 Using the navigation buttons , select the required format.
dd-mm: Day/month
mm-dd: Month/day
 Confirm the format selection by pressing the PRINT button, set the date and time in
the following way.
 The active item is displayed by underlining, e.g. 25.
Using the navigation buttons , set the day and confirm by pressing the PRINT
button.
 The month will become the active item (it will be underlined). Using the navigation
buttons , set the month and confirm by pressing the PRINT button.
 In the same way set the year, hours, minutes and seconds.
 After you finish setting, press and hold the PRINT button until the sound signal
stops. The scale will be switched to the menu again.
56
Description
AUTO-OFF function off
Automatic switch off after 2 minutes with no weight
change
Automatic switch off after 5 minutes with no weight
change
Automatic switch off after 15 minutes with no weight
change
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011