Date And Time Setup; Non-Verifiable Models - KERN GAB-P Series Operating Manual

7.11 Date and time setup

The scale allows you to set up the date and time of the printout.
For that purpose proceed in the following manner:

7.11.1 Non-verifiable models:

 Press
and
display will show the recently entered year, e.g. "2015".
The last digit is flashing.
 Confirm the displayed year by pressing the
or
 using
,
year in the following manner:
 change the digit by pressing
 increase the digit by pressing the
 confirm data entered by pressing the
The display will show the recently entered: month and day, e.g.
"08.12" = „Month.Day". The last digit is flashing.
 With the manner described above, enter the current
month and day and confirm.
The display will show the recently entered: hour and minutes,
e.g. "10_42" = "Hour _ Minutes". The last digit is flashing.
 With the manner described above, enter the current hour
and minutes and confirm.
The self-test will run and the scale will automatically switch to
the weighing mode. The current date and time will be now
printed on the printout after the
32
buttons during the self-test, the
and buttons, enter the current
and
button,
button is pressed.
button,
(Example)
buttons,
button.
Hour - Minutes
GAB-P-BA-e-1613
Month - Day