Changing The Name Of A Setting Type - MIMAKI TS100-1600 Operation Manual

Chapter 3 Settings
Item
Type Normal/Soft/
Cleaning Check
MAPS4
MAPS4
Smoothing
Level
Speed 50 to 100 %
Concentration OFF/Weak/
correction between
passes
Prefeed
Setup Reset
*1. The default settings are shown underlined.
*2. Settings applied if no settings can be made in the RIP software (host) or if this machine is prioritized.

Changing the name of a setting type

You can change the name of a setting type. The name can include alphanumeric characters or symbols.
1
On the LOCAL mode screen, select [MENU] > [Setup], then press the [ENTER] key.
• The setting types are displayed.
2
Select Settings 1 to 4 and press the [FUNC2] key.
• The rename screen appears.
3
Enter the desired name, then press the [ENTER] key.
• The setting type is renamed.
Setting
*1 *2
- Sets the head cleaning type.
Hard
ON/OFF - Sets whether nozzle checking is performed after auto head
cleaning is completed.
- - MAPS: Mimaki Advanced Pass System
• This function disperses the boundaries between passes to
make feed streaks between passes less visible.
• Altering MAPS may alter the color. This function may be
less effective with certain types of images.
AUTO/ - This should normally be set to "AUTO". When set to
MANUAL "MANUAL", the following items are displayed:
0 to 100 % - Increasing smoothing makes streaks less visible.
- Reducing speed will make streaks less visible. However,
printing will be slower.
- This function makes periodic concentration variations less
Medium/ noticeable.
Strong
• Check by printing. Once set, does not need to be adjusted
until the print head is replaced.
OFF/100 to - Sets the distance the media is fed backward and forward
500 mm before printing.
• Moving the media backward and forward prevents it
sticking to the platen and minimizes wrinkles in the media.
- - Initializes the details set.
Details
76