Loading The Roll Media - MIMAKI TS100-1600 Operation Manual

Chapter 2 Printing

Loading the Roll Media

1
Raise the clamp lever.
2
Move the rear left roll holder to the roll setting position.
• Unscrew the roll holder retaining screw before moving.
Set the roll holder reference line within the area
indicated by the arrows as shown below.
Roll Holder
Set Position
2 Inch Roll Media
3
Tighten the retaining screw on the rear left roll holder.
4
Place roll media on the roll media hanger.
5
Insert the paper core of the roll media on to the rear left roll holder.
• Push in until the paper core moves no farther.
6
Insert the rear right roll holder into the paper core.
• Unscrew the roll holder retaining screw before moving.
7
Tighten the retaining screw on the rear right roll holder.
3 Inch Roll Media
56
Setting position for 3-inch paper core
3 Inch Roll Media
Roll Holder
Set Position
2 Inch Roll Media
Setting position for 2-inch paper core
Reference