MIMAKI TS100-1600 Operation Manual page 75

Item
DRYING TIME
Scan HOST/0.0 to
PRINT END HOST/0 to
Margin/Left HOST/-10 to
Margin/Right
Vacuum fan HOST/Weak/
Standard/
Feed Speed HOST/10 to
100 to 200 %
Auto Cleaning
SETUP File/Length/
Time/OFF
Interval
(File) 1 to 1,000
(Length) 0.1 m to 100.0
(Time) 10 to 60 to
Setting
*1 *2
• ON: Print data area
- - Sets the ink drying time.
0 Sets the time to stop the carriage each time the carriage
9.9 sec scans.
• In the MIMAKI RIP software (RasterLink), it is indicated as
the "drying time after each scan".
0 Sets the stop time after printing. After the set time passes, the
120 min next data is printed.
• The Mimaki RIP software (RasterLink) does not allow the
user to specify PRINT END. If the machine is set to
"HOST", the time will be "0".
0m Sets the offset value from the media left and right standard
85 mm m margins (15 mm).
• The left and right margins should be set to at least -5 mm
when using the media holder. This eliminates the risk of
printing on top of the media holder.
• The Mimaki RIP software (RasterLink) does not allow the
user to specify margins. If the machine is set to "HOST",
the offset value will be "0 mm" for the left and right
margins.
Stro Sets the force with which the medium is held down.
ng
• This can be used to prevent media jamming and print
Strong
head damage caused by the media lifting up.
100 Sets the media feed speed.
• Depending on print conditions, the speed may not vary for
certain settings.
• Setting to 100 % or more reduces the time required to
complete printing but may affect print quality due to
insufficient drying time.
- - Sets the conditions to perform auto head cleaning after the
preset number of files are printed.
- Sets the conditions to perform auto head cleaning.
- - Sets auto head cleaning intervals.
- Sets the interval at which the number of files is selected.
- Sets the interval at which the print length is selected.
m
- Sets the interval at which the print time is selected.
240 min
Details
Unidirectional print
Print data
Carriage movement
75
Chapter 3 Settings
Bi-directional print
3