Messages Displayed On The Ink Ic Chip Registration Screen - MIMAKI TS100-1600 Operation Manual

Message
Ink Near End
Wrong Ink IC
Ink Color
Ink Type
Expiration
Expiration:1MONTH
Expiration:2MONTH

Messages displayed on the ink IC chip registration screen

Message
Color: Magenta
Expiration: 2021/01/01
Caution:
XX days until expiration
Registered IC chip
Unable to register.
The registration limit was
exceeded.
Unable to register.
XXXXXXX (Error name)
Expiration Over
Ink Type
Ink Color
Cause
• Ink levels are low.
• An error occurred with the
information on the ink IC
chip.
• The ink color registered
on the IC chip is different
from the ink color filled.
• The ink type registered on
the IC chip is different
from the ink type filled.
• The ink has expired.
• The ink is one month past
its expiration date and
cannot be used.
• The ink is two months
past its expiration date
and cannot be used.
Cause
• The ink expiration date is
approaching.
• The ink IC chip inserted is
already registered.
• More than one was
registered for each slot.
• The ink IC chip could not
be registered due to an
error.
• The ink is two months
past its expiration date
and cannot be used.
• A different ink type is
registered on the ink IC
chip.
• A different ink color is
registered on the ink IC
chip.
127
Chapter 5 Troubleshooting
Corrective action
• The ink will run out soon. Have new ink
ready. "When Ink Near End is
Displayed"(P. 37)
1. Check to confirm the ink IC chip was
inserted correctly. "Registering the Ink
IC Chip"(P. 42)
2. Turn off the power on the machine and turn
it on after a while.
3. Replace with new ink.
Ink"(P. 38)
• Insert an ink IC chip for the correct ink
color. "Registering the Ink IC
Chip"(P. 42)
• Insert an ink IC chip for the correct ink
type. "Registering the Ink IC
Chip"(P. 42)
• Replace with new ink or use up as
quickly as possible. Printing is possible.
"Replacing Ink"(P. 38)
• Replace with new ink. Printing is not
possible. "Replacing Ink"(P. 38)
Corrective action
• Use the ink before the expiration
period.
• Replace with a new ink IC chip.
"Registering the Ink IC Chip"(P. 42)
• Use up the equivalent of one bottle
before registering.
• Insert the correct ink IC chip.
"Registering the Ink IC Chip"(P. 42)
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 37)
• Insert an ink IC chip for the correct ink
type. "Registering the Ink IC
Chip"(P. 42)
• Insert an ink IC chip for the correct ink
color. "Registering the Ink IC
Chip"(P. 42)
"Replacing
5