MIMAKI TS100-1600 Operation Manual page 79

6
Select the "head number and nozzle row" for nozzle recovery, then press the [ENTER] key.
7
Enter the "nozzle number" for nozzle recovery, then press the [ENTER] key.
• Select the entry number before entering the nozzle number.
• Nozzle recovery is set.
Entry number 1 to 10
8
Press the [ENTER] key once entry is complete.
• Select [Maintenance] > [Nozzle Recovery] > [Test Print], then select "ON" to perform
nozzle recovery and test printing.
Checking whether nozzle recovery is set correctly
1
Load the media.
2
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
3
Select [Nozzle Recovery] > [Check], then press the [ENTER] key.
• The Judgement screen will be displayed.
4
Enter the desired printing conditions.
SELECT ENTRY NOZZLE
Head1-A
Head1-B
Head number
Head1-C
Head1-D
Head2-A
<<
Head2-D
No.1
No.2
No.3
No.4
No.5
<<
Judgement Condition
Resolution
PASS
Scan Speed
MAPS 4
OVER PRINT
>
>
Nozzle row number
>
>
>
>>
16
128
Nozzle number
184
OFF
OFF
>>
"Test Printing"(P. 60)
720 x 720
8
NORMAL
>
1
79
Chapter 3 Settings
3