MIMAKI TS100-1600 Operation Manual page 43

2
Insert a new ink IC chip into the ink IC chip slot on the right-hand side of the product.
• A registration screen appears when the ink IC chip is inserted.
3
Press the OK button.
• The information on the ink IC chip is registered.
• Do not dispose of the ink IC chip. It is needed to rewrite the ink registration information on
the ink IC chip.
• If the warning message appears, take appropriate actions by referring to the following.
Message
Color: Magenta
Expiration: 2021/01/01
Caution:
XX days until expiration
Registered IC chip
Unable to register.
The registration limit was
exceeded.
Unable to register.
XXXXXXX (Error name)
Expiration Over
Ink Type
Ink Color
Wrong Ink IC
Ink IC Chip Registrasion
Color : Magenta
Expiration : 2021/01/01
OK
Cause
• The ink expiration date is
approaching.
• The ink IC chip inserted is
already registered.
• More than one was
registered for each slot.
• The ink IC chip could not
be registered due to an
error.
• The ink is two months
past its expiration date
and cannot be used.
• A different ink type is
registered on the ink IC
chip.
• A different ink color is
registered on the ink IC
chip.
• An error occurred with the
information on the ink IC
chip.
43
Chapter 1 Before Use
Corrective action
• Use the ink before the expiration
period.
• Replace with a new ink IC chip.
"Registering the Ink IC Chip"(P. 42)
• Use up the equivalent of one bottle
before registering.
• Insert the correct ink IC chip.
"Registering the Ink IC Chip"(P. 42)
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 37)
• Insert an ink IC chip for the correct ink
type. "Registering the Ink IC
Chip"(P. 42)
• Insert an ink IC chip for the correct ink
color. "Registering the Ink IC
Chip"(P. 42)
1. Check to confirm the ink IC chip was
inserted correctly. "Registering the Ink
IC Chip"(P. 42)
2. Turn off the main power and wait a while
before turning back on.
3. Replace with new ink.
Displayed"(P. 37)
1
"When Ink End is