Installation Precautions - MIMAKI TS100-1600 Operation Manual

Installation Precautions

• Do not install this machine in environments where flammable substances are present (e.g.,
gasoline, flammable spray, alcohol, thinner, lacquer, or powder). This machine is not explosion-
proof. The product poses a risk of explosion.
• Do not install this machine in locations where open flames are present. The ink may ignite.
• Do not place vases, pot plants, cups, cosmetics, containers of chemicals or water, or small
metal objects on top of this machine. There is a risk of failure, electric shock, or fire if liquids or
items drop inside the machine.
• Do not install this machine in humid locations or locations where it may be exposed to splashing
water. Otherwise there is a risk of failure, electric shock, or fire.
• Avoid installing this machine in locations accessible to children.
• A ventilation system must be provided if this machine is installed in a poorly ventilated area or
sealed room.
• Be sure to observe the following points when installing an extractor outlet:
(1) The extractor outlet must be installed in accordance with applicable local EHS
(environmental, health, and safety) guidelines.
(2) If the extractor outlet is fitted with a shutoff valve, the valve must be open when this machine
is in use.
• Do not install this machine in locations where dust or powder is present. Failure or printing
defects may result (e.g., nozzle clogging, deflection) if dust gets inside this machine.
• Do not install this machine in locations exposed to drafts (e.g., from air conditioning).
Disregarding this precaution may result in dust or powder getting inside this machine.
• Do not install this machine in unstable locations or locations subject to vibration. This will
increase the risk of failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to direct sunlight.
• Do not install this machine in locations subject to sudden temperature changes. This will
increase the risk of failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to excessive noise from large machinery.
• Do not install this machine in locations where photographic fixing agents generate vapor or acid
gas (e.g., acetic acid, hydrochloric acid) or locations filled with metal working fluids or highly
volatile substances (e.g., amines, amine-modified alcohols). Malfunctions or printing defects
may result (e.g., nozzle clogging, deflection) as print head ink is more likely to harden under
such environments.
• Operating conditions: 20 °C to 30 °C (68 °F to 86 °F), 35 %RH to 65 %RH (no condensation)
• Guaranteed accuracy temperature range: 20 °C to 25 °C (68 °F to 77 °F)
13
Installation Precautions