System Halt - MIMAKI TS100-1600 Operation Manual

Chapter 5 Troubleshooting

SYSTEM HALT

Error Message
number
406 WIPER ORG
1c3 PCB SLDR2H
• If any other SYSTEM HALT number is displayed, Turn off the power on the machine and turn it
on after a while.
1. Clean the wiper and around the wiper.
"Wiper Cleaning"(P. 92)
2. Turn off the power on the machine and turn it on after a while.
"Turning Off the Power"(P. 30)
1. Turn off the power on the machine and turn it on after a while.
"Turning Off the Power"(P. 30)
"Turning Off the Power"(P. 30)
132
Corrective action