Setting The Cleaning Intervals And Type; Fill Up Ink - MIMAKI JV300-130 A Operation Manual

Setting the Cleaning Intervals and
Type
The cleaning type and the interval between each cleaning
operation are set.
Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Press , and press the
2
• "AUTO MAINTENANCE" will be selected.
Press the several times to select
3
"Interval" or "Type", and press the
key.
Press
4
press the
• Set value : The set value will differ according to
the ink type being used.
• Set value of type
Press the
5
to endthe setting.
(MENU)
key.
to select a set value, and
key.
: SOFT/ NORMAL/ HARD
key several times

Fill up Ink

Supplies ink to correct nozzle clogging.
Press the
1
key in LOCAL.
• MAINTENANCE MENU will be displayed.
Press timestwice, and press the
2
key.
• "FILL UP INK" will be selected.
Press
3
• Soft : Use this in cases where head cleaning
will not achieve recovery, such as when
multiple clogged nozzles occur or
nozzle cluster dropout occurs.
• Normal : Use this if nozzle cluster dropout occurs
in initial ink filling.
• Hard : Use this in cases where the dumper has
become empty, such as in dumper
replacement.
Press the
4
• If you selected "Soft" in step 4, a Select Fill Up
Color screen will be displayed.
If you selected "Normal" or "Hard", go to step 6.
Press
5
and press the
Press the
6
• Ink is supplied automatically.
Press the
7
to end the setting.
Chapter 4 Maintenance
(MENU)
to select the filling type.
key.
to select the filling color,
key.
key.
key several times
1
2
2
4
5
6
4-13