Media Sensor Cleaning - MIMAKI TS100-1600 Operation Manual

Chapter 4 Maintenance
• If not, use a syringe to draw up some maintenance liquid and fill until it almost overflows
from the cap.
4
Close the front cover, then press the [ENTER] key.
• Pump tube (ink discharge channel below the cap) washing starts.

Media Sensor Cleaning

Media sensors are located on the rear cover and carriage underside. The media cannot be detected
correctly if dust or debris accumulates on the sensors. Remove any debris using cotton swabs or a soft cloth.
Rear of product
l Cleaning the carriage underside sensor
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
3
Open the maintenance covers.
4
Clean the media sensor.
Carriage underside
98