MIMAKI TS100-1600 Operation Manual page 49

This machine can be used with roll media.
6.
Check the state of the print head nozzles.
"Test Printing"(P. 60)
Good example
7.
Clean the head to clear malfunctioning nozzles.
There are three different head cleaning methods. Choose the head cleaning method based on test print
results. "Head Cleaning"(P. 62)
8.
Adjust the media feed amount.
"Feed Correction"(P. 63)
9.
Adjust the drop position for bi-directional printing.
"Correcting the Drop Position"(P. 65)
"Loading the media"(P. 53)
Core
Second band
First band
Media feed direction
The drop position correction value here will be "+4.0".
49
Take-up unit
Bad example
Deflection Nozzle clogging
Media feed direction
Chapter 2 Printing
2