Stopping Printing (Data Clear) - MIMAKI TS100-1600 Operation Manual

Chapter 2 Printing
2
Start printing.
• Printing starts once RIP data is received.
• Print speeds may differ for the same image data, depending on the width of the medium
loaded, print origin position, and resolution.
• If an error occurs, the machine switches to LOCAL mode once printing is completed.
Further printing is not possible.
Pausing Printing
1
Press [LOCAL] while printing is in progress.
• Printing is paused.
• If data is being sent from a PC, data transmission is paused at the PC.
2
Press [REMOTE].
• Printing resumes.
• No other functions can be used when printing is paused.

Stopping Printing (Data Clear)

1
On the LOCAL mode screen, select [DATA CLEAR].
2
Press the [ENTER] key to clear the received data.
• The receive buffer is cleared.
Resolution
Number of passes
Scan direction (Uni: unidirectional, Bi: bidirectional)
Scan speed (Std: standard, Hi: high speed)
REMORT
600x600 16p / Bi / Hi / Vd
0.0m
PRINT
Length of medium printed
LOCAL
ADJUST
Dot type
VD: Variable dot
ND: Normal dot
width:1340mm
DATA CLEAR
70