Media Holder Cleaning; Platen Cleaning - MIMAKI TS100-1600 Operation Manual

5
Once cleaning is complete, close the cover, then press the [ENTER] key.

Media Holder Cleaning

• Turn off the main power supply and unplug the power cable before carrying out maintenance.
• Do not allow liquids to get inside the machine. Otherwise there is a risk of failure, electric shock,
or fire.
Continuing to use the dirty platen will prevent proper feeding of the media. It will also cause dried ink and
attached dust to rub against the head nozzle surface and lead to ejection failures (e.g., nozzle clogging or
deflection).
• For heavy soiling, wipe using a soft cloth soaked in diluted neutral detergent and thoroughly
wrung out.

Platen Cleaning

• Turn off the main power supply and unplug the power cable before carrying out maintenance.
• Do not allow liquids to get inside the machine. Otherwise there is a risk of failure, electric shock,
or fire.
Continuing to use the dirty platen will prevent proper feeding of the media. It will also cause dried ink and
attached dust to rub against the head nozzle surface and lead to ejection failures (e.g., nozzle clogging or
deflection).
• The grooves in which the media holder slides and the media is cut are susceptible to dust
accumulation. Remove any debris carefully.
Media holder
99
Chapter 4 Maintenance
4