Setup Menu - MIMAKI TS100-1600 Operation Manual

Chapter 3 Settings

3.1 Setup menu

Print conditions (settings 1 to 4) can be saved in advance for specific media.
l Menu List
The user can select to prioritize the settings on the machine or the settings on the PC. Setting individual
menus to "Host" prioritizes PC settings. To prioritize settings for this machine, select a setting other than
"Host".
• For more information on how to specify RIP software, refer to the RIP software operating
manual.
Item
Feed Comp. -9999 to 0 to
Drop.PosCorrect
(Resolution) All/360std/720
(Correction -40.0 to 0 to
value)
Auto Correct
Feed Comp.
Drop.PosCorrect
(Resolution) All/360std/720
(Correction -40.0 to 0 to
value)
Logical Seek
Setting
*1 *2
- Corrects the media feed amount.
9999
• Print a pattern and enter the correction amount.
- - Corrects the drop position for bi-directional printing.
- Select the resolution to be corrected. When "All" is selected,
std/720hi correction patterns for all resolutions will be printed.
- Check the pattern and enter correction values.
40.0
- - Detects a correction pattern with the sensor and automatically
corrects the drop position (automatic correction function).
- -
• Check to confirm that the media does not lift up.
- -
• Load white and clean media.
• Synthetic paper or cloth media may not be detected.
• Do not send the RIP data from the PC during pattern
printing.
• If automatic correction is unsuccessful, correct the position
manually. [MENU] > [Setup] > [Feed Comp.] or
[Drop.PosCorrect]
- Select the resolution to be corrected. When "All" is selected,
std/720hi correction patterns for all resolutions will be printed.
- Check the pattern and enter correction values.
40.0
HOST/ON/ OFF Sets the range of carriage movement.
OFF
• OFF: Machine size area
Details
Unidirectional print
Carriage movement
74
Bi-directional print