Wiper Cleaner Replacement - MIMAKI TS100-1600 Operation Manual

7
Mount a new wiper.
8
Once replacement is complete, close the cover, then press the [ENTER] key.
• The wiper usage count is reset.

Wiper Cleaner Replacement

Replace with a new wiper cleaner once a year.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Platen Right End], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
4
Remove the fittings.
• Pull out the fitting by holding the protrusion.
• Take care to avoid losing the rubber seal.
5
Remove the wiper cleaner.
• Pull it forward to detach it.
Lug
1
2
1
1
2
105
Chapter 4 Maintenance
4