MIMAKI TS100-1600 Operation Manual page 32

Chapter 1 Before Use
• The PC used to transfer print data must be located on the same network as this product. This product
cannot be connected via a router.
• Use a 1000BASE-T compatible computer or switching hub. Printing requires 1000BASE-T support.
l Checking the LAN connection
1
Check the display on this product.
• Local guidance can be used for checking.
Guidance)"(P. 28)
• Printing is not possible if "100Mbps", "10Mbps", or "No Connect" is displayed. Event email can be
used. "Event Email Function Settings"(P. 84)
2
Check the lamp on the LAN connector.
• The LAN connector lamp illuminates when the machine is running.
Color Status
Green Illuminated
Off
Orange Illuminated
Flashing
Off
Switching hub
INFORMATION
LAN Status
Connected via 1000BASE-T
Connected via a network other than 1000BASE-T
• 1,000 Mbps is not supported if only the orange lamp is illuminated or
flashing. Check the specifications for the PC, peripheral devices, and
cable.
Linked up (connected).
Data being received
Link down (not connected)
32
"Displaying Machine Information (Local
1000Mbps
Overview