Chapter 2 Printing
Loading the Media on the Feeding Air Shaft
1
Tilt the shaft clamp.
• Before tilting the shaft clamp, be sure to check that the air shaft inlet is facing upward.
• The shaft will not rotate unless the power is turned on.
• Be careful to avoid catching your hands or fingers when using force to move the shaft
clamp.
• The shaft clamp movement is made stiff to ensure safety. A plastic hammer or similar can
be used if it is difficult to move.
2
Remove the air shaft.
3
Insert the feeding air shaft into the media roll.
Shaft clamp
Air shaft
Media
66