Messages Displayed On The Ink Ic Chip Registration Screen - MIMAKI UJV100-160 Operation Manual

Message
Ink Color
Ink Type
Expiration
Expiration:1MONTH
Expiration:2MONTH

Messages displayed on the ink IC chip registration screen

Message
Color: Magenta
Expiration: 2021/01/01
Caution:
XX days until expiration
Registered IC chip
Unable to register.
The registration limit was
exceeded.
Unable to register.
XXXXXXX (Error name)
Ink Expiration Over
Ink type
Ink Color
WRONG INK IC
Replace Ink Bottle
Cause
• A different ink color is
registered on the ink IC chip.
• A different ink type is
registered on the ink IC chip.
• The ink has expired.
• The ink is one month past its
expiration date and cannot
be used.
• The ink is two months past
its expiration date and
cannot be used.
Cause
• The ink expiration date is
approaching.
• The ink IC chip inserted is
already registered.
• More than one was
registered for each slot.
• The ink IC chip could not be
registered due to an error.
• The ink is two months past
its expiration date and
cannot be used.
• A different ink type is
registered on the ink IC chip.
• A different ink type is
registered on the ink IC chip.
• An error occurred with the
information on the ink IC
chip.
• The ink IC chip was
registered when an ink end
or ink near-end error
occurred.
123
Chapter 5 Dealing with Problems
Corrective action
2. Turn off the power on the machine and turn
it on after a while. "Turning Off the
Power"(P. 31)
3. Replace with new ink.
Displayed"(P. 39)
• Insert an ink IC chip for the correct ink color.
Insert Ink IC Chip
• Insert an ink IC chip for the correct ink type.
Insert Ink IC Chip
• Replace with new ink or use up as quickly
as possible. Printing is possible.
Ink End is Displayed"(P. 39)
• Replace with new ink or use up as quickly
as possible. Printing is possible.
Ink End is Displayed"(P. 39)
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 39)
Corrective action
• Use the ink before the expiration period.
• Replace with a new ink IC chip. Insert Ink IC
Chip
• Use up the equivalent of one bottle before
registering.
• Insert the correct ink IC chip. Insert Ink IC
Chip
• Replace with new ink. Printing is not
possible. "When Ink End is
Displayed"(P. 39)
• Insert an ink IC chip for the correct ink type.
Insert Ink IC Chip
• Insert an ink IC chip for the correct ink color.
Insert Ink IC Chip
1. Check to confirm the ink IC chip was
inserted correctly. Insert Ink IC Chip
2. Turn off the main power and wait a while
before turning back on.
Power"(P. 31)
3. Replace with new ink.
Displayed"(P. 39)
• Mount a new ink bottle and register the ink
IC chip.
"When Ink End is
"When
"When
"Turning Off the
5
"When Ink End is