Display Phone (D P) - Nortel HomeOffice II User Manual

July 1999

DISPLAY PHONE (D P)

Introduction
The DISPLAY PHONE command displays the following characteristics of the
telephones served by the HLC:
phone type: cordless or corded
indicator update status: enabled or disabled
See "SET PHONE (S P)" on page 128
To display telephone characteristics
1 If you are not already logged in, log in to the MMI.
See "LOGIN (L)" on page 91.
Result: The MMI presents you with the logged-on command prompt.
(See "Command prompts" on page 91.)
2 At the command prompt, type DISPLAY PHONE or D P and press Enter.
Result: The MMI displays the HLC's telephone characteristics that are set
on a per-channel basis by the set phone command. The on-screen display
is similar to the following figure:
Wed, 06-07-1999
HLC::>d p
Channel Phone Type
0 Corded
1 Corded
2 Corded
3 Corded
4 Corded
5 Corded
6 Cordless
7 Corded
8 Corded
9 Corded
10 Corded
11 Corded
12 Corded
13 Corded
14 Corded
15 Corded
Wed, 06-07-1999
HLC::>
Line Card Configuration Guide
2:19:02
Indicator Update
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
2:27:23
.
Maintenance
107