Auto Pan; Slicer - Roland SH-4d Owner's Manual

MFX Parameters

Auto Pan

Cyclically modulates the stereo location of the sound.
Parameter
TRI, SQR, SIN, SAW1, SAW2, TRP
Mod Wave
OFF, ON
Rate Sync
Rate 0.05–10.00 [Hz]
Rate Note Note(P.167)
Depth 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127

Slicer

By applying successive cuts to the sound, this effect turns a conventional sound into a sound that appears to be played as a
backing phrase.
This is especially effective when applied to sustain-type sounds.
Parameter Value
Step 1–16 0–127
OFF, ON
Rate Sync
116
Value
Modulation Wave
TRI: Triangle wave
SQR: Square wave
SIN: Sine wave
SAW1/2: Sawtooth wave
TRP: Trapezoidal wave
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo
Frequency of the change
Depth to which the effect is applied
Amount of boost/cut for the low-frequency range
Amount of boost/cut for the high-frequency range
Output Level
Level at each step
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Explanation
(System)(P.76)
Explanation