Enhncr -> Dly (Enhancer -> Delay); Chorus -> Dly (Chorus -> Delay) - Roland SH-4d Owner's Manual

Parameter Value
D100: 0W–D0:
Flg Bal
100W
Level 0–127
Enhncr -> Dly (Enhancer -> Delay)
Parameter
Enh Sens 0–127
Enh Mix 0–127
OFF, ON
Delay
Sync
D. Time 1–2600
D.Time Nt Note(P.167)
-98–+98 [%]
Delay Fbk
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
Dly HF
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
D100: 0W–D0: 100W
Dly Bal
Level 0–127
Chorus -> Dly (Chorus -> Delay)
Parameter
Cho 0.0–100 [ms]
PreDly
OFF, ON
Cho Sync
Adjusts the volume balance between the sound that is sent through the flanger (W) and the
sound that is not sent through the flanger (D).
Output Level
Value
Value
Explanation
Explanation
Sensitivity of the enhancer
Level of the overtones generated by the enhancer
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Delay time from when the original sound is heard to when the
delay sound is heard
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
Adjusts the frequency above which sound fed back to the effect
will be cut. If you do not want to cut the high frequencies, set this
parameter to BYPASS.
Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through the
delay (D).
Output Level
Explanation
Adjusts the delay time from the direct sound until the chorus
sound is heard.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
MFX Parameters
163