Looper; Djfx Looper - Roland SH-4d Owner's Manual

MFX Parameters

Looper

DJFX Looper

Loops a short portion of the input sound.
You can vary the playback direction and playback speed of the input sound to add turntable-type effects.
Parameter Value
230–23 (not
Length
straight)
-1.00–+1.00
Speed
OFF, ON
Loop Sw
Level 0–127
142
Specifies the length of the loop.
Specifies the playback direction and playback speed.
- direction: Reverse playback
+ direction: Normal playback
0: Stop playback
As the value moves away from 0, the playback speed becomes faster.
If you turn this on while the sound is heard, the sound at that point will be looped.
Turn this off to cancel the loop.
* If the effect is recalled with this ON, this parameter must be turned OFF and then turned ON
again in order to make the loop operate.
Output Level
Explanation