Phaser Type; Phaser - Roland SH-4d Owner's Manual

MFX Parameters

Phaser Type

Phaser

A phase-shifted sound is added to the original sound and modulated.
Parameter Value
4-STAGE, 8-STAGE, 12-
Mode
STAGE
Manual 0–127
OFF, ON
Rate Sync
Rate 0.05–10.00 [Hz]
Rate Note Note(P.167)
Depth 0–127
INVERSE, SYNCHRO
Polarity
Resonance 0–127
-98–+98 [%]
Feedback
Mix 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127
100
Number of stages in the phaser
Adjusts the basic frequency from which the sound will be modulated.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Frequency of modulation
Depth of modulation
Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Amount of feedback
Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Level of the phase-shifted sound
Amount of boost/cut for the low-frequency range
Amount of boost/cut for the high-frequency range
Output Level
Explanation