Creating a Tone
DRAWING
Use the [1] and [2] knobs to set the waveform shape.
When you press the [ENTER] button, the cursor moves automatically, so you can draw the waveform by turning only the [2] knob.
Parameter
Wave Step 1–
[2] knob, [ä] [å] buttons (on the top
32
screen only)
PITCH
Coarse Tune
TIMBRE
Wave Edge
[OSC 1] slider
Step 1–8
[OSC 2] slider
Step 9–16
[OSC 3] slider
Step 17–24
[OSC 4] slider
Step 25–32
[OSC 1] button + [OSC 1] slider
Step 1–8 Slope
Step 9–16
[OSC 2] button + [OSC 2] slider
Slope
Step 17–24
[OSC 3] button + [OSC 3] slider
Slope
Step 25–32
[OSC 4] button + [OSC 4] slider
Slope
36
Controllers
Value
-72–
+72
-24–
+24
0–127
-72–
+72
-72–
+72
-72–
+72
-72–
+72
-18–
+18
-18–
+18
-18–
+18
-18–
+18
Explanation
Sets the value for each step in the waveform data.
Specifies the pitch in semitone steps (maximum ±2 octaves).
Sets how smoothly the steps are connected when playing back
a waveform.
Smaller values produce smoother transitions between steps.
Sets the values for steps 1–8 in the waveform data.
Sets the values for steps 9–16 in the waveform data.
Sets the values for steps 17–24 in the waveform data.
Sets the value for steps 25–32 in the waveform data.
Sets the slope of the straight lines that connect steps 1 through
8 in the waveform data.
Sets the slope of the straight lines that connect steps 9 through
16 in the waveform data.
Sets the slope of the straight lines that connect steps 17
through 24 in the waveform data.
Sets the slope of the straight lines that connect steps 25
through 32 in the waveform data.