Roland SH-4d Owner's Manual page 78

Main Menu (MENU)
CONTROLLER
Parameter
KBD Sw 1–127
Velo
DIRECT, CATCH
Knob
Mode
WHITE, YELLOW, ORANGE, PURPLE,
Note Color PINK, SKY BLUE, PALE YELLOW,
PALE GREEN, PALE BLUE, PALE PINK
D-MOTION
Parameter Value
-100– Sets the output X (horizontal direction) value when this unit is placed flat.
Offset X
+100
-100– Sets the output Y (forward/backward direction) value when this unit is placed flat.
Offset Y
+100
1–10 Sets the output sensitivity to this unit's tilt.
Sense
Smaller values produce a greater output in respect to this unit's tilt.
0–10 When this unit is placed nearly flat, this sets how much force is required to return the output value to
Gravity
zero.
78
Value
Sets the note velocity that's generated when you press one of the keyboard
buttons on this unit.
Specifies whether the parameter value corresponding to a controller is
immediately updated when you operate that controller (DIRECT) or only after
the controller reaches the same position as the parameter's current value
(CATCH).
Sets the color used to light up each [1]–[16] button LED, when notes are
present in the corresponding steps (in sequencer mode).
Explanation
Explanation