Creating Phrases And Modulation (Visual Arpeggio) - Roland SH-4d Owner's Manual

Main Menu (MENU)

Creating Phrases and Modulation (VISUAL ARPEGGIO)

This function lets you create phrases and modulation by various means.
BOUNCE
Press a keyboard button and then tilt this unit.
You can also play using an external keyboard connected to this unit.
Controller
[1] knob Sets the width of the bouncing board.
[2] knob Sets the strength of the rebound effect on the board.
BUBBLE
Press a keyboard button.
You can also play using an external keyboard connected to this unit.
Controller
[1] knob Adjusts the overall speed.
[2] knob Sets how much the tilt of this unit affects the movement of the bubbles.
[ä] button The bubbles are erased from first to last.
The bubbles are erased from last to first.
[å] button
SKETCH
Draw a series of notes (a scale) on the screen and press the [ENTER] button.
Controller
[1] knob Moves the cursor left/right.
Hold down the knob and move it to draw lines.
[2] knob Moves the cursor up/down.
Hold down the knob and move it to draw lines.
Sets the scale used to quantize the notes you draw (making the notes you draw fit into the scale).
[ç] [æ] buttons If this is set to a value other than "CHROMA", the notes that play are the closest in the selected scale to the
ones you drew.
Sets the scale root.
[ä] [å] buttons
Keyboard Moves the cursor to the note position (pitch) you played.
buttons
PONG
Press a keyboard button and use the [1] and [2] knobs to move the paddles.
Controller
[1] knob
[2] knob
80
Explanation
Explanation
Explanation
Moves the left paddle.
Moves the right paddle.
Explanation