Chorus -> Fl (Chorus -> Flanger); Jd-Multi - Roland SH-4d Owner's Manual

Parameter
D100: 0W–D0: 100W
Dly Bal
Level 0–127
Chorus -> Fl (Chorus -> Flanger)
Parameter Value
Cho 0.0–100 [ms]
PreDly
OFF, ON
Cho Sync
C. Rate 0.05–10.00 [Hz]
Note(P.167)
C.Rate Nt
Cho Depth 0–127
D100: 0W–D0:
Cho Bal
100W
Flg PreDly 0.0–100 [ms]
OFF, ON
Flg Sync
F. Rate 0.05–10.00 [Hz]
F.Rate Nt Note(P.167)
Flg Depth 0–127
-98–+98 [%]
Flg Fbk
D100: 0W–D0:
Flg Bal
100W
Level 0–127

JD-Multi

Recreates the effects included in group A of the JD-800.
Parameter Value
DS - PH - SP - EN
Value
Adjusts the delay time from the direct sound until the chorus sound is heard.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Modulation frequency of the chorus effect
Modulation depth of the chorus effect
Volume balance between the direct sound (D) and the chorus sound (W)
Adjusts the delay time from the direct sound until the flanger sound is heard.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Modulation frequency of the flanger effect
Modulation depth of the flanger effect
Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Adjusts the volume balance between the sound that is sent through the flanger (W) and the
sound that is not sent through the flanger (D).
Output Level
Selects the connection order of the effects.
Explanation
Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through the
delay (D).
Output Level
Explanation
Explanation
MFX Parameters
165