Auto Pan - Roland JX-305 Owner's Manual

Feedback (Feedback Level)
Adjusts the number of delay repeats.
Range: 0–+98 (%)

Auto Pan

This setting causes the panning of the delay sound to
move in synchronization with the tempo.
Range: OFF
2MES 3MES 4MES 8MES 16MES
Low Gain
Adjusts the boost or cut of the low frequency range.
Range: -15–+15
High Gain
Adjusts the boost or cut of the high frequency range.
Range: -15–+15
Balance (Effect Balance)
Adjusts the volume balance between the original
sound and the delay sound.
Range: D100:0E–D0:100E
With a setting of "D100:0E" no delay sound will be
output.
Output Level
[MULTI CTRL 3]
Specifies the output volume from the Short Delay
effect.
Range: 0–127
Auto Pan (Automatically Move
the Stereo Location)
This effect automatically moves the stereo location of
the sound. You can cause the sound to be panned left
and right in time with low notes such as a Bass Drum,
or in synchronization with the tempo of the pattern.
fig.7-49 (#MC fig.4-60)
AUTO-PAN
MULTI CTRL1
Depth
MULTI CTRL 2
Rate
MULTI CTRL3
Output Level
Chapter 7. Applying Effects to the Sound (Effects)
LFO Type
Determines the waveform that will be used to pan the
sound to left and right.
Range: TRI, TRP, SIN, SAW1, SAW2, SQR
Rate
[MULTI CTRL 2]
Specifies the rate at which the pan will be moved.
Range: 0.1–10.0
2MES 3MES 4MES 8MES 16MES
If a note value or measure is selected as the value of
this parameter, the Rate will synchronize with the
tempo of the pattern at intervals of the specified note
value or measure.
* When the Bass Sensitivity parameter is set to "MODE2,"
the Rate setting will be ignored.
Bass Sens (Bass Sensitivity)
Make this setting when you wish to shift the panning
at the timing of the bass notes.
Available Settings:
OFF: The panning will change at the speed speci-
fied by Rate.
MODE1: The Rate value will increase at the timing of
the bass notes.
MODE2: The panning will change at the timing of
the bass notes.
Depth
[MULTI CTRL 1]
Specifies the depth of panning.
Range: 0–127
Low Gain
Adjusts the boost or cut of the low frequency range.
Range: -15–+15
High Gain
Adjusts the boost or cut of the high frequency range.
Range: -15–+15
Output Level
[MULTI CTRL 3]
Specifies the output volume of the Auto Pan effect.
Range: 0–127
7
121