Trem Chorus (Tremolo Chorus) - Roland SH-4d Owner's Manual

MFX Parameters

Trem Chorus (Tremolo Chorus)

This is a chorus effect with added Tremolo (cyclic modulation of volume).
Parameter Value
Pre Delay 0.0–100 [ms]
OFF, ON
Cho Sync
C.Rate 0.05–10.00 [Hz]
C.Rate Nt Note(P.167)
Cho Depth 0–127
OFF, ON
Trm Sync
T.Rate 0.05–10.00 [Hz]
T.Rate Nt Note(P.167)
Trm Separate 0–127
Trm Phase 0–180 [deg]
Balance D100: 0W–D0: 100W
Level 0–127
110
Adjusts the delay time from the direct sound until the chorus sound is heard.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Modulation frequency of the chorus effect
Modulation depth of the chorus effect
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Modulation frequency of the tremolo effect
Depth of the tremolo effect
Spread of the tremolo effect
Volume balance between the direct sound (D) and the tremolo chorus sound (W)
Output Level
Explanation