Mm Filter (Multi-Mode Filter) - Roland SH-4d Owner's Manual

Parameter
Gain 0–+12 [dB]
Mod Sw OFF, ON
TRI, SQR, SIN, SAW1, SAW2
Mod Wave
OFF, ON
Rate Sync
Rate 0.05–10.00 [Hz]
Rate Note Note(P.167)
Depth 0–127
0–127
Attack
Level 0–127

MM Filter (Multi-mode Filter)

This is a filter that is adjusted for effective use in a DJ performance.
Parameter Value
LPF/HPF, LPF, HPF,
Type
BPF
Tone 0–255
0–255
Color
-12, -24, -36 [dB]
Slope
Gain 0–+12 [dB]
Level 0–127
Value
Amount of boost for the filter output
On/off switch for cyclic change
How the cutoff frequency will be modulated
TRI: Triangle wave
SQR: Square wave
SIN: Sine wave
SAW1: Sawtooth wave (upward)
SAW2: Sawtooth wave (downward)
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo
Tempo
Frequency of modulation
Depth of modulation
Speed at which the cutoff frequency will change
This is effective if Mod Wave is SQR, SAW1, or SAW2.
Output Level
LPF/HPF: The filter type is automatically switched according to the Filter Tone parameter
value.
Frequency at which the filter operates
Filter resonance level
Higher values more strongly emphasize the region of the operating frequency.
Amount of attenuation per octave
-12 dB: gentle
-24 dB: steep
-36 dB: extremely steep
Amount of boost for the filter output
Output Level
Explanation
(Pattern)(P.53)
(System)(P.77)
Explanation
MFX Parameters
95