Enhncr -> Cho (Enhancer -> Chorus); Enhncr -> Fl (Enhancer -> Flanger) - Roland SH-4d Owner's Manual

MFX Parameters
Enhncr -> Cho (Enhancer -> Chorus)
Parameter Value
Enh Sens 0–127
Enh Mix 0–127
Cho 0.0–100 [ms]
PreDly
OFF, ON
Cho Sync
0.05–10.00 [Hz]
C. Rate
C.Rate Nt Note(P.167)
Cho Depth 0–127
D100: 0W–D0:
Cho Bal
100W
Level 0–127
Enhncr -> Fl (Enhancer -> Flanger)
Parameter Value
Enh Sens 0–127
Enh Mix 0–127
Flg PreDly 0.0–100 [ms]
OFF, ON
Flg Sync
F. Rate 0.05–10.00 [Hz]
F.Rate Nt Note(P.167)
Flg Depth 0–127
-98–+98 [%]
Flg Fbk
162
Sensitivity of the enhancer
Level of the overtones generated by the enhancer
Adjusts the delay time from the direct sound until the chorus sound is heard.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Frequency of modulation
Depth of modulation
Adjusts the volume balance between the sound that is sent through the chorus (W) and the
sound that is not sent through the chorus (D).
Output Level
Sensitivity of the enhancer
Level of the overtones generated by the enhancer
Adjusts the delay time from the direct sound until the flanger sound is heard.
If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Frequency of modulation
Depth of modulation
Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Explanation
Explanation