Mod Delay (Modulation Delay) - Roland SH-4d Owner's Manual

MFX Parameters
Parameter
DRTime Note(P.167)
Nt
Phase L NORMAL, INVERSE
NORMAL, INVERSE
Phase R
NORMAL, CROSS
Fbk Mode
-98–+98 [%]
Feedback
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
HF Damp
1600, 2000, 2500, 3150, 4000, 5000, 6300,
8000, BYPASS [Hz]
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
D100: 0W–D0: 100W
Balance
Level 0–127

Mod Delay (Modulation Delay)

Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
132
Value Explanation
Phase of left and right delay sound
NORMAL: Non-inverted
INVERT: Inverted
Selects the way in which delay sound is fed back into the effect. (See
the figures above.)
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
Adjusts the frequency above which sound fed back to the effect is
filtered out. If you don't want to filter out any high frequencies, set
this parameter to BYPASS.
Amount of boost/cut for the low-frequency range
Amount of boost/cut for the high-frequency range
Volume balance between the direct sound (D) and the delay sound
(W)
Output Level