Roland SH-4d Owner's Manual page 77

Parameter Value
LCD 1–10
Contrast
Startup 01-01–08-
16
Pattern
OSC MODEL OFF, ON
Lock
TEMPO/SYNC
Parameter Value
Tempo 20.00–300.00
PATTERN,
Tempo Src
SYSTEM
AUTO, INT, MIDI,
USB
Sync
Mode
OFF, MIDI, USB,
Sync Out
MIDI/USB
MIDI
Parameter Value
1–16, OFF
Ctrl Ch
Part 1 Ch 1–16
Part 2 Ch 1–16
1–16
Part 3 Ch
Part 4 Ch 1–16
Part R Ch 1–16
OFF, ON
Soft Thru
USB-MIDI OFF, ON
Thru
OFF, MIDI
IN, USB
Remote Kbd
Local Sw OFF, ON
MIDI Tx
Parameter Value
Tx PC OFF, ON Specifies whether program change messages will be transmitted (ON) or not be transmitted (OFF).
Tx Bank OFF, ON Specifies whether bank select messages will be transmitted (ON) or not be transmitted (OFF).
MIDI Rx
Parameter Value
Rx PC OFF, ON Specifies whether program change messages will be received (ON) or not be received (OFF).
Rx Bank OFF, ON Specifies whether bank select messages will be received (ON) or not be received (OFF).
Adjusts the contrast of the display.
Specifies the pattern that is selected at start-up.
If this is "ON", a dialog box is displayed that confirms the change in oscillator modes when you turn
the model knob.
Specifies the system tempo.
When you switch patterns, this setting specifies whether to use the system tempo (SYSTEM) or
the tempo stored in the pattern (PATTERN).
Sets which synchronization signal is used by this unit.
If a plug is connected to the EXT CLK IN jack, this unit always operates in sync with the signals
received from the EXT CLK IN jack, regardless of the Sync Mode setting on this unit.
Ø
"EXT CLK IN jack(P.12)"
Specifies the connector from which MIDI clock messages etc. are output.
Specifies the MIDI receive channel on which MIDI messages (program change and bank select) from
an external MIDI device can be received to switch programs.
If you don't want programs to be switched from a connected MIDI device, turn this "OFF".
Specifies the MIDI receive channel for part 1.
Specifies the MIDI receive channel for part 2.
Specifies the MIDI receive channel for part 3.
Specifies the MIDI receive channel for part 4.
Specifies the MIDI receiving channel for part R.
If this is ON, MIDI messages that are input from the MIDI IN connector are re-transmitted without
change from the MIDI OUT connector.
Specifies whether MIDI messages received at the USB or MIDI IN port are transmitted without
change from the MIDI OUT connector and USB port (ON) or not (OFF).
Sets which connector is used for input when you use an external MIDI keyboard instead of the
keyboard of the SH-4d.
Normally you will leave this "OFF".
Set the transmit channel of your external MIDI keyboard to the Ctrl Ch of this unit.
Ø
"System Settings (SYSTEM
Connects (ON) or disconnects (OFF) the keyboard from the internal sound generator.
Explanation
Explanation
Explanation
SETTINGS)(P.76)"
Explanation
Explanation
Main Menu (MENU)
77