Ep -> Delay (Ep Amp Simulator -> Delay) - Roland SH-4d Owner's Manual

EP -> Delay (EP Amp Simulator -> Delay)
Parameter
Type
Bass -50–+50
Treble -50–+50
Dly Switch OFF, ON
OFF, ON
Delay
Sync
D. Time 1–1300
D.Time Nt Note(P.167)
0–15
Dly Accel
-98–+98 [%]
Delay Fbk
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
Dly HF 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
D100: 0W–D0: 100W
Dly Bal
LINE, OLD, NEW, WURLY, TWIN
Sp Type
OD Switch OFF, ON
OD Gain 0–127
0–127
OD Drive
Level 0–127
Value
OLDCASE
NEWCASE
Explanation
Type of amp
A standard electric piano sound of the early 70s
A standard electric piano sound of the late 70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Delay on/off
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Tempo (System)(P.76)
Delay time from when the original sound is heard to when the
delay sound is heard
Speed at which the current delay time changes to the specified
delay time when you change the delay time.
The speed of the pitch change will change simultaneously with
the delay time.
Adjusts the proportion of the delay sound that is fed back into
the effect.
Negative (-) settings will invert the phase.
Frequency at which the high-frequency portion of the delay
sound will be cut (BYPASS: no cut)
Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through
the delay (D).
Type of speaker
If LINE is selected, the sound will not be sent through the
speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Also changes the volume.
Output Level
MFX Parameters
161