Pattern Utilities - Roland SH-4d Owner's Manual

Creating a Pattern (Step Sequencer)

Pattern Utilities

1. Hold down the [SHIFT] button and press the [14] button.
The PATTERN UTILITY screen appears.
2. Use the [1] or [2] knob or press the [ä] [å] buttons to select the item.
3. To execute the operation, press the [ENTER] button.
Item
DUPLICATE STEPS
(PART)
DUPLICATE STEPS (PTN)
CLEAR MOTION
RANDOMIZE STEPS
INITIALIZE PATTERN
68
Duplicates the content of the step sequencer for the selected part, which doubles the number of
steps.
* A part can contain up to 64 steps after its content is doubled.
Duplicates the content of the step sequencer for all parts, which doubles the number of steps of each
part.
* A part can contain up to 64 steps after its content is doubled.
Erases all recorded knob motions for the selected part.
Randomly overwrites the step sequencer for the selected part.
Initializes the selected pattern.
Explanation