Driven Clutch Installation - Polaris RZR PRO R Service Manual

5. Torque the three fasteners
TORQUE
Helix Fasteners:
63 ft-lbs (85 Nm)
6. Once back together, verify the alignment marks made
during disassembly are properly aligned.
7. Install the stationary and movable sheave on the
vehicle. See Driven Clutch Installation.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
a
to specification.

DRIVEN CLUTCH INSTALLATION

r
1. Install driven clutch, bolt
y
. Torque fastener to specification.
TORQUE
Driven Clutch Retaining Bolt:
55 ft-lbs (75 Nm)
2. Install the drive belt.
3. Install outer clutch cover. Install five fasteners
engage 1/4 turn latches to secure the cover. Torque
fasteners to specification.
TORQUE
Outer PVT Cover Fasteners:
60 in-lbs (7 Nm)
PVT SYSTEM
t
, spacer , and washer
e
and
6.25
6