Air Box Removal; Air Box Installation - Polaris RZR PRO R Service Manual

AIR BOX REMOVAL

1. Remove seats.
2. Remove upper rear close off panel.
q
3. Remove eight fasteners
Remove close-off panel cover.
e
4. Loosen the band clamps
to the air box.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
w
and two push rivets .
retaining the intake hoses
ENGINE / COOLING SYSTEM
w
5. Remove two fasteners retaining the air box.
6. Lift air box upward to disengage lower mounting tabs
and remove air box from vehicle.

AIR BOX INSTALLATION

1. Install the air box and re-engage lower mounting tabs.
2. Install the intake hoses onto the air box. Tighten hose
clamps to specification.
TORQUE
Intake Hose Clamps:
35 in-lbs (3 Nm)
3. Install two air box mounting fasteners. Torque
fasteners to specification.
TORQUE
Air Box Mounting Fasteners:
9 ft-lbs (12 Nm)
4. Install rear close off panel cover. Torque fasteners to
specification.
TORQUE
Rear Close Off Panel Cover Fasteners:
7 ft-lbs (10 Nm)
5. Install upper rear close off panel.
6. Install both seats.
3
3.13