Stabilizer Bar Clocking - Polaris RZR PRO R Service Manual

e
4. Remove two fasteners retaining stabilizer bar to
the frame. Repeat on opposite side of vehicle and
remove the stabilizer bar.
INSTALLATION
1. Install stabilizer bar into mounts. install four mounting
fasteners. Torque fasteners to specification.
TORQUE
Stabilizer Bar Mounting Fasteners:
52 ft-lbs (70 Nm)
2. Install arm onto stabilizer bar in the same orientation
as removed.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
STEERING / SUSPENSION
3. Install arm-to-bar fastener. Torque fastener to
specification. Repeat on opposite side of vehicle.
TORQUE
Stabilizer Arm-to-Bar Fasteners:
81 ft-lbs (110 Nm)
4. Install one fastener retaining arm to stabilizer bar link.
Torque fastener to specification. Repeat on opposite
side of vehicle.
TORQUE
Stabilizer Bar Link Fasteners:
81 ft-lbs (110 Nm)

STABILIZER BAR CLOCKING

Stabilizer bar arm incorrect clocking: One arm may be
clocked at a different spline position than the other,
resulting in uneven torsion on the bar during vehicle
operation. This may result in incorrect or inconsistent ride
height, or shearing/failure of the stabilizer bar.
STABILIZER BAR CLOCKING
1. Disconnect drop links from both ends of the stabilizer
bar.
9
9.19