Polaris RZR PRO R Service Manual page 140

ENGINE / COOLING SYSTEM
13. Remove the outer slip-fit post and install the Drive
Clutch Puller (PN PU-52919) and holder (PN PU-
52920) to remove the stationary sheave.
Drive Clutch Puller:
PU-52919
Drive Clutch Holder
PU-52920
14. Remove inner clutch cover fasteners
remove the inner clutch cover.
a
15. Remove two O-rings
3.26
i o
and , and
from the transmission.
16. Disengage hose clamps
from the transmission.
17. Disconnect rear tail light harness.
18. Remove eight fasteners
f
two fasteners from the rear bumper. Remove rear
fascia and bumper.
19. Loosen two air box hose clamps
air ducts from the air box.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
s
and remove vent hoses
d
from the rear fascia, and
g
and disconnect
© Copyright Polaris Industries Inc.