Polaris RZR PRO R Service Manual page 489

t
5. Remove one fastener , three push-pins
remove the front fender. Repeat for opposite side of
the vehicle. If equipped, disconnect antenna.
u
6. Remove two fasteners and remove the fender
mounting bracket.
i
7. Remove four fasteners
bumper assembly.
8. Disconnect electrical connectors from the headlights
and accent lights, if equipped..
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
y
, and
and remove the front
o
9. Remove two push-pins
fascia.
10. Disconnect coolant hoses from the radiator.
11. Disconnect electrical connector from cooling fan
assembly.
a
12. Remove two fasteners retaining the radiator
assembly.
13. Disconnect any wiring from the radiator assembly.
14. Remove radiator, cooling fan and radiator shroud as
an assembly.
15. Remove push-pins to separate radiator from fan and
shroud assemblies.
INSTALLATION
1. Install new radiator onto cooling fan and shroud, and
install assembly mounting push-pins.
2. Mount radiator assembly onto vehicle chassis and
install radiator hoses.
3. Route and install wiring harness onto radiator
assembly.
ELECTRICAL
and remove the front
12
12.31