Engine Installation Preparation - Polaris RZR PRO R Service Manual

Table of Contents

Advertisement

ENGINE / COOLING SYSTEM

ENGINE INSTALLATION PREPARATION

IMPORTANT
Remove oil filter from engine and place a rag over the
oil filter housing before installation.
1. Remove the engine from the stand using an engine
hoist.
2. Carefully place the engine mounting brackets from
the engine on the mounts from the frame.
3. Install the engine mount isolator nuts and torque to
specification.
TORQUE
Engine Mount Isolator Nuts (Lower):
50 ft-lbs (68 N·m)
4. If the transmission was removed from engine prior to
removal, attach the transmission to engine mounting
w
fasteners
and torque to specification.
TORQUE
Transmission to Engine Fasteners:
40 ft-lbs (54 N·m)
3.30
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rzr pro r 4Rzr pro r 2022Rzr pro r 4 2022

Table of Contents